Spa system flush is design to clean the surface and the plumbing of your spa.
Even the very best maintained spas can accumulate unseen deposits over time.
While the most common build is oils and grime from dirt and dead skin another
build up is biofilm.
Biofilm is a layer of microorganisms contained in a matrix (slime layer), which
forms on surfaces in contact with water. Biofilms provide a safe haven for organisms
like Listeria, E. coli and legionella where they can reproduce to levels where
contamination of products passing through that water becomes inevitable.
Biofilm can contain pathogens that make it rather impervious to standard
treatments like chlorine, bromine and algaecides.
Earth friendly formula so it
is safe to use. Contains no soap, detergents or alcohol.
It is recommend that you use
Spa system flush prior to each draining.
To use :
- Remove filters and adjust water level if necessary.
- Add 2 oz for every 100 gallons of Spa System Flush directly to old spa
water.
- Run spa with jets on (high speed) using all jets and water features for at
least 15 minutes an hour is ideal.
- Run spa on low or in circulation mode overnight if convenient
- Drain spa and clean shell. You can use a small amount of spa flush
on a sponge for residue.
- Reinstall cleaned filters, refill and balance water.
16 oz. Bottle.
Once you have tried this product you will swear by it like we do.
